Lumped Loudspeaker Driver Using a Lumped Mechanical System
Application ID: 55901
Example of a moving-coil loudspeaker where lumped parameters represent the behavior of the electrical and mechanical components.
The Thiele-Small parameters (small-signal parameters) serve as input to the lumped model, which is represented using the Electric Circuit interface. The lumped model is coupled to a 2D axisymmetric pressure acoustics model, which is used to describe the surrounding air domain. The output from the model includes, among many things, the impedance, and the radiated acoustic power.
In this model, the mechanical speaker components such as moving mass, suspension compliance, and suspension mechanical losses are modeled using the Lumped Mechanical System interface.
This model example illustrates applications of this type that would nominally be built using the following products:
however, additional products may be required to completely define and model it. Furthermore, this example may also be defined and modeled using components from the following product combinations:
- COMSOL Multiphysics® и
- Модуль «Акустика» и
- Модуль «Динамика многотельных систем» и
- либо Модуль «AC/DC», Модуль «Электрохимические аккумуляторы», Модуль «MEMS», Модуль «Плазма», Модуль «Радиочастоты», или Модуль «Полупроводники»
The combination of COMSOL® products required to model your application depends on several factors and may include boundary conditions, material properties, physics interfaces, and part libraries. Particular functionality may be common to several products. To determine the right combination of products for your modeling needs, review the Спецификация and make use of a free evaluation license. The COMSOL Sales and Support teams are available for answering any questions you may have regarding this.