Transient Rolling Contact
Application ID: 39561
This conceptual example shows how to handle a transient contact problem with stick-slip friction transition. A soft hollow pipe subjected to gravity is released at the top of a halfpipe. The pipe motion varies between sliding and rolling, depending on its position in the halfpipe and its velocity. The pipe deforms such that its cross-section becomes oval due to the contact and the inertial forces. An energy balance validates the accuracy of the solution.
You can learn more about this example in a blog post: Modeling a Transient Contact Problem with Stick-Slip Friction Transition.
This model example illustrates applications of this type that would nominally be built using the following products:
however, additional products may be required to completely define and model it. Furthermore, this example may also be defined and modeled using components from the following product combinations:
- COMSOL Multiphysics® и
- либо Модуль «MEMS», Модуль «Динамика многотельных систем», или Модуль «Механика конструкций»
The combination of COMSOL® products required to model your application depends on several factors and may include boundary conditions, material properties, physics interfaces, and part libraries. Particular functionality may be common to several products. To determine the right combination of products for your modeling needs, review the Спецификация and make use of a free evaluation license. The COMSOL Sales and Support teams are available for answering any questions you may have regarding this.