Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Impedance boundary condition of helical structure

Please login with a confirmed email address before reporting spam

Hi, I am trying to run some RF simulations with a helical coil. however, the surface of the helical coil is not applicable for Impedance boundary conditions. and this will lead to an error: failed to find a solution. So it is that we couldn't define an impedance boundary condition on a helical surface?

Thank you very much in advance!


2 Replies Last Post Dec 2, 2011, 4:14 a.m. EST

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Dec 2, 2011, 3:49 a.m. EST
Hi,

you must remove the helical domain from the emv node. Otherwise the inside of the domain would be modeled and an impedance boundary condition makes no sense.

Cheers
Edgar
Hi, you must remove the helical domain from the emv node. Otherwise the inside of the domain would be modeled and an impedance boundary condition makes no sense. Cheers Edgar

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Dec 2, 2011, 4:14 a.m. EST
Hi Edgar,

Thank you for your reply. I have already defined an explicit 'helical surface'. When the 'helical surface' is selected as the Impedance Boundary Condition, all of the boundaries of 'helical surface' are 'not applicable'.
I am trying to attach the model file here, but it is over sized.

Thank you!

Deyu
Hi Edgar, Thank you for your reply. I have already defined an explicit 'helical surface'. When the 'helical surface' is selected as the Impedance Boundary Condition, all of the boundaries of 'helical surface' are 'not applicable'. I am trying to attach the model file here, but it is over sized. Thank you! Deyu

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.