A. K. R. Paul , R. D. Pal ,
 CSIR-Central Electrochemical Research Institute, Karaikudi, Tamil Nadu, India
 Academy of Scientific and Innovative Research, Chennai, Tamil Nadu, India
A lithium-ion battery comprises of two intercalating electrodes separated by a membrane, sandwiched between aluminum and copper current collecting plates. The battery performance depends upon several parameters and its operating conditions. In this work we developed a model for a lithium iron phosphate battery and validated our results with experimental charge-discharge curves. We however note ...
P. Katiyar , S. Khanam ,
 Indian Institute of Technology Roorkee, Roorkee, Uttarakhand, India
This paper deals with the simulation of mathematical model for supercritical extraction. Reverchon, 1996 extracted sage oil using supercritical extraction method from sage leaves at 9 MPa and 50 ᵒC. Four mean size of sage leaves ranging from 0.25 to 3.10 mm were taken for extraction with other experimental conditions and process parameters. Experimental results were fitted in the model developed ...
A. G. Dixon , D. S. Polcari , A. D. Stolo , M. Tomida ,
 Department of Chemical Engineering, Worcester Polytechnic Institute, Worcester, MA, USA
For design of radial flow fixed bed reactors, it is important to ensure proper flow distribution through the catalyst bed. A 2D axisymmetric model of a radial-flow reactor was used to evaluate flow maldistribution through the catalyst bed and the pressure drop through the reactor for a specified flow rate. Effects of different catalysts, screen sizes and flow direction were simulated. Factors ...
G. Madabattula, S. K. Gupta
Department of Chemical Engineering, Indian Institute of Science, Bangalore, Karnataka, India
Low cost high energy density batteries that can be charged and discharged rapidly are required in a number of applications. Tapping energy from renewal resources such as solar, wind and tide requires rapidly generated energy to be first stored and then used round the clock. Storing energy of a moving vehicle as it slows down and recovering it to accelerate the vehicle later can significantly ...
D. Groulx, and W. Ogoh
Mechanical Engineering Department, Dalhousie University, Halifax, Nova Scotia, Canada
One way of storing thermal energy is through the use of latent heat energy storage systems. One such system, composed of a cylindrical container filled with paraffin wax, through which a copper pipe carrying hot water is inserted, is presented in this paper. It is shown that the physical processes encountered in the flow of water, the heat transfer by conduction and convection, and the phase ...
J. Sturnfield ,
 Dow Chemical, Freeport, TX, USA
The pore sizes of many membranes being studied for separating the components in gas mixtures are on the scale of nanometers. Depending on the specific gases and pressures being used, this scale will put the flows in the Transition between Slip Flow and Knudsen regime. The differential flow of the gas components gives the relative diffusion of the gases through the membrane. There are a number of ...
J. Hu, R. Jia, K. Wan, X. Xiong
Department of Mechanical Engineering, University of Bridgeport, Bridgeport, CT, USA
Mechanical and Industrial Engineering, Northeastern University, Boston, MA, USA
Department of Electrical Engineering, University of Bridgeport, Bridgeport, CT, USA
The dynamic behavior of droplet impingement on a solid surface is important to many engineering applications. This paper studied the dynamic behavior of a droplet impinging onto solid dry surfaces with different surface wettability using the COMSOL Multiphysics® software. The simulation results were validated against experimental results. It was found that the Level Set method can predict the ...
A. Nagaraj , P. L. Mills ,
 Texas A&M University - Kingsville, Kingsville, TX, USA
H2SO4 is a very important chemical commodity, and indeed, a nation’s H2SO4 production has been a reasonably good indicator of its industrial strength for the last century or so1,2. Nearly 350 MM tons of H2SO4 was produced in 20143.The demand for H2SO4 in United States exceeds the supply and hence to increase production, recycling and innovative clean technologies must be explored. From ...
A. Nanduri , P. L. Mills ,
 Department of Chemical and Natural Gas Engineering, Texas A&M University - Kingsville, Kingsville, TX, USA
In the early 1920’s, Gas-To-Liquids (GTL) and Coal-To-Liquids (CTL) technologies were developed to account for the depleting crude oil resources . During this period, Franz Fischer and Hans Tropsch developed a process to convert synthesis gas (syn gas), derived from coal gasification, to a wide range of high value-added products. This process later came to be known as Fischer-Tropsch (F-T) ...
K. Cluff, L. Saeednia, H. Mehraein , R. Asmatulu
Department of Bioengineering, Wichita State University, Wichita, KS, USA
Department of Mechanical Engineering, Wichita State University, Wichita, KS, USA
Polymeric hydrogel is a promising class of drug delivery systems with the controlled release behavior in the body. In-situ forming hydrogels can be injected into the body as a fluid which forms a gel within the body tissue and improve the efficacy of the drugs. Various polymers have been used as in-situ hydrogel formulations. These polymeric formulations can form gels at body temperature while ...