Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Adding a resistor

Ramachandra Rao Kolluri

Please login with a confirmed email address before reporting spam

Hi

I need to add a resistor between a voltage source and a device to be modeled (thermistor). The device has high dependence on temperature and electric-field. I am able to model the device alone at a voltage but I am not able to add a resistor in series to the supplied voltage.
I am using COMSOL 4.3.
Please help !!

Thankyou

1 Reply Last Post Aug 11, 2012, 3:18 a.m. EDT
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Aug 11, 2012, 3:18 a.m. EDT
Hi

with a search on CIR I find this, can it help ?

www.comsol.eu/community/forums/general/thread/28887/

And you have also examles in the model library

--
Good luck
Ivar
Hi with a search on CIR I find this, can it help ? http://www.comsol.eu/community/forums/general/thread/28887/ And you have also examles in the model library -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.