Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

post processing paramteric sweep in MATLAB

Posted Aug 9, 2012, 4:57 p.m. EDT Version 4.1 0 Replies

Pavan Kumar Penumakala
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

hallo

i done simulation with t =0:0.1:1
in same timedependent study used parametric sweep for three parameters 0.5 0.75 1

while post processing in MATLAB

pd= mpheval(model,'x','Solnum','4','Outersolnum','1')

i understand that solnum 4 is for timestep 0.4 and outersolnum 1 is for a parameter 0.5 ..am i correct?

pd= mpheval(model,'x','Solnum','4','Outersolnum','2')
and
pd= mpheval(model,'x','Solnum','4','Outersolnum','3')
are giving errors
please support me by commenting on this
thanks in advance
pavan
0 Replies Last Post Aug 9, 2012, 4:57 p.m. EDT
COMSOL Moderator

Hello Pavan Kumar Penumakala

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content