Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

PCF design

Please login with a confirmed email address before reporting spam

Hi,
I tried to draw dispersion curve. mode field confinement was good but dispersion curve was not suitable. How can i improve this? I used 4 rings of air holes. pitch=1.7um,d=2um.

2 Replies Last Post Feb 21, 2012, 2:36 a.m. EST
COMSOL Moderator

Hello Selim Habib

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.


Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Feb 17, 2012, 8:57 a.m. EST
Hi,

can you please share .mph file.
Hi, can you please share .mph file.

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Feb 21, 2012, 2:36 a.m. EST
Thanks.
I have already solved the problem.
Thanks. I have already solved the problem.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.