Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Boundary condition-oscillating flow

Please login with a confirmed email address before reporting spam

Hi every one,
I have an oscillating flow(w.r.t time) inlet velocity profile( in the form of a Finite Fourier series expression) to be supplied as an unsteady inlet velocity boundary condition to a simple straight cylindrical duct. Note that the inlet velocity profile includes negative flow as well,that is the flow REVERSES periodically.

My requirement is that the pressure profile at the exit of the duct should evolve as a function of time as the solver solves the problem. So I cannot specify a pressure value or cannot impose any constraint on the exit pressure.So I don't know what boundary condition I need to specify at the exit of the duct in this case.

Can I get some help in this regard.Thanks in advance,

SM Ananth

2 Replies Last Post Mar 21, 2011, 6:13 a.m. EDT
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Mar 19, 2011, 2:03 p.m. EDT
Hi

I'm not a CFD expert, but as I have understood the inflow/outflow conditions do not restrict the direction of the flow, its rather a naming convention. So why not try some of the other outflow conditions, there is not only the restricted pressure one ;) And take the time to read through the doc and the help files a couple of times

--
Good luck
Ivar
Hi I'm not a CFD expert, but as I have understood the inflow/outflow conditions do not restrict the direction of the flow, its rather a naming convention. So why not try some of the other outflow conditions, there is not only the restricted pressure one ;) And take the time to read through the doc and the help files a couple of times -- Good luck Ivar

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Mar 21, 2011, 6:13 a.m. EDT
Hello sir,

Thanks...

SM Ananth
Hello sir, Thanks... SM Ananth

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.