Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Free Vibration analysis of MEE plates

Please login with a confirmed email address before reporting spam

Kindly guide me as to how to proceed with the analysis of magnetorestrictive plates. Also, if you can direct me to some tutorial videos or other material regarding the same, it will be a great help.

1 Reply Last Post Nov 2, 2016, 8:16 a.m. EDT
Jeff Hiller COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 8 years ago Nov 2, 2016, 8:16 a.m. EDT
Hello Abhinav,
There was no built-in support for magnetostriction at version 4.3, but in version 5.2a COMSOL introduced an interface for magnetostriction in the Structural Mechanics Module. You can read more on that capability here: www.comsol.com/release/5.2a/structural-mechanics-module . You will also need the AC/DC Module.
To discuss updating your license, please contact your COMSOL representative: www.comsol.com/contact .
Best regards,
Jeff
Hello Abhinav, There was no built-in support for magnetostriction at version 4.3, but in version 5.2a COMSOL introduced an interface for magnetostriction in the Structural Mechanics Module. You can read more on that capability here: https://www.comsol.com/release/5.2a/structural-mechanics-module . You will also need the AC/DC Module. To discuss updating your license, please contact your COMSOL representative: https://www.comsol.com/contact . Best regards, Jeff

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.