Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

average above parameterized surface

Please login with a confirmed email address before reporting spam

I have a problem with that, it just does not work. I had just NaN in exported data. No matter what parameters i need to be averaged. But contours work just fine on this surface.

2 Replies Last Post Dec 1, 2010, 4:09 a.m. EST
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Dec 1, 2010, 2:54 a.m. EST
Hi

I cannot really udnerstand what you mean, the average work ON a surface/boundary, and for a cut plane/surface inside a domain, if you tweak the solution accordingly (havent really tried that one).

what do you mean with "above", and in wich version + applciation mode/physics ?

--
Good luck
Ivar
Hi I cannot really udnerstand what you mean, the average work ON a surface/boundary, and for a cut plane/surface inside a domain, if you tweak the solution accordingly (havent really tried that one). what do you mean with "above", and in wich version + applciation mode/physics ? -- Good luck Ivar

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Dec 1, 2010, 4:09 a.m. EST
Ok, i see, i need some parameters to be averaged on parameterized surface i created. Cant i do this? Data fields is ok, solution is ok too, problem is in postprocessing. I can calculate average on boundary but on parameterized surface i got NaN. Version 4.0a, structural analysis.
Ok, i see, i need some parameters to be averaged on parameterized surface i created. Cant i do this? Data fields is ok, solution is ok too, problem is in postprocessing. I can calculate average on boundary but on parameterized surface i got NaN. Version 4.0a, structural analysis.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.