В галерее представлены файлы приложений COMSOL Multiphysics® для применения в самых различных областях, включая электрические, механические, гидродинамические и химические дисциплины. Для скачивания доступны как готовые модели и приложения, так и пошаговые инструкции по их созданию, которые помогут вам в построении ваших собственных моделей. Чтобы найти модели для вашей сферы деятельности, воспользуйтесь функцией быстрого поиска, а затем войдите в систему или создайте учетную запись COMSOL® Access, связанную с действующей лицензией COMSOL®, чтобы скачать .MPH-файлы моделей.
Microfluidics Modulex

Inkjet Nozzle — Level Set Method

Although initially invented to be used in printers, inkjets have been adopted for other application areas, such as within the life sciences and microelectronics. Simulations can be useful to improve the understanding of the fluid flow and to predict the optimal design of an inkjet for a ... Читать дальше

Free Surfaces with Level Set, Phase Field, and Moving Mesh: A Comparison

We present the results from a comparison of the level set, phase field, and moving mesh methods for modeling free liquid surfaces in the COMSOL Multiphysics® software. The comparison is carried out using an example problem. The example studies the formation of surface waves ... Читать дальше

Capillary Filling

This example studies a narrow vertical cylinder placed on top of a reservoir filled with water. Because of wall adhesion and surface tension at the air/water interface, water rises through the channel. Surface tension and wall adhesive forces are often used to transport fluid through ... Читать дальше

Droplet Breakup in a T-Junction

Emulsions consist of small liquid droplets immersed in an immiscible liquid and widely occur in the production of food, cosmetics, fine chemicals, and pharmaceutical products. The quality of the product is typically dependent on the size of the droplets. Simulating these processes can ... Читать дальше

Drug Delivery System

This example describes the operation of a drug delivery system that supplies a variable concentration of a water soluble drug. A droplet with a fixed volume of water travels down a capillary tube at a constant velocity. Part of the capillary wall consists of a permeable membrane ... Читать дальше

Jet Instability — Moving Mesh

The Marangoni effect results in a slip velocity in the tangential direction on a fluid/fluid interface due to gradients in the surface tension coefficient. When the surface tension coefficient is constant, a two-fluid system may exist in static equilibrium. This is because the surface ... Читать дальше

Parameter Optimization of a Tesla Microvalve

The topology optimized Tesla microvalve is used as inspiration for a parametrized geometry. The optimization of this geometry takes erosion and dilation of the geometry into account by optimizing over a parametric sweep. In this example the optimization is driven by the worst of the 3 ... Читать дальше

Optimization of a Tesla Microvalve

This model performs a topological optimization for a Tesla microvalve. A Tesla microvalve inhibits backwards flow using friction forces rather than moving parts. The design can be optimized by distributing a specific amount of material within the modeling domain. The goal is to maximize ... Читать дальше

Electrowetting Lens

The contact angle of a two-fluid interface with a solid surface is determined by the balance of the forces at the contact point. In electrowetting the balance of forces at the contact point is modified by the application of a voltage between a conducting fluid and the solid surface. In ... Читать дальше

Bubble-Induced Entrainment Between Stratified Liquid Layers

This model is a benchmark for three-phase flow commonly used in food processing, pharmaceutical industry, and chemical processing. The results are validated against data reported in the literature. A gas bubble rises through two layers of liquid, a lighter liquid resting on top of a ... Читать дальше

1–10 of 23