В галерее представлены файлы приложений COMSOL Multiphysics® для применения в самых различных областях, включая электрические, механические, гидродинамические и химические дисциплины. Для скачивания доступны как готовые модели и приложения, так и пошаговые инструкции по их созданию, которые помогут вам в построении ваших собственных моделей. Чтобы найти модели для вашей сферы деятельности, воспользуйтесь функцией быстрого поиска, а затем войдите в систему или создайте учетную запись COMSOL® Access, связанную с действующей лицензией COMSOL®, чтобы скачать .MPH-файлы моделей.
AC/DC Modulex

Multi-Turn Coil Winding around a Ferromagnet

A demo model of a 50 Hz AC coil wound around a ferromagnetic (linear) core. The model is intended as a tutorial to show how to create a relatively complex geometry and set up the new Multi-Turn Coil features for the simulation. The model requires the Design module to fillet the edges of ... Читать дальше

Mutual Inductance and Induced Currents in a Multi-Turn Coil

The mutual inductance and induced currents between a single turn primary and twenty turn secondary coil in a concentric coplanar arrangement is computed using a frequency domain model. The secondary coil is modeled using a homogenized approach which does not explicitly consider each turn ... Читать дальше

Computing the Resistance of a Wire

Every electrical device has some resistance. That is, when a voltage difference is applied across any two terminals of the device, there will be a directly proportional current flow. This model demonstrates how to compute the resistance of a short section of copper wire. The convergence ... Читать дальше

Induction Currents from Circular Coils

A time-varying current induces a time-varying magnetic field. The magnetic field induces currents in neighboring conductors. The induced currents are called eddy currents. In this model, the phenomenon is illustrated by a time-harmonic field simulation as well as a transient analysis, ... Читать дальше

Transient Modeling of a Capacitor in a Circuit

A transient model of a capacitor is solved in combination with an external electrical circuit. The finite element model of the capacitor is combined with a circuit model of a voltage source and a resistor. A step change in voltage is applied, and the transient current through the ... Читать дальше

Modeling of an Electric Generator in 3D

These models demonstrate how to set up a sector model of rotating machinery both in 2D and 3D using the *Rotating Machinery, Magnetic* interface in COMSOL Multiphysics®. The stator in these permanent magnet AC generator examples consists of a stator winding backed by an iron core. The ... Читать дальше

Electromagnetic Forces on Parallel Current-Carrying Wires

This model shows a setup of two parallel wires with a constant current running through both. Their cross-sections are successively reduced until a set force per unit length is reached. Читать дальше

Inductive Heating of Copper Cylinder

The induced currents in a copper cylinder produce heat that in turn change the electrical conductivity. This means that the field propagation has to be solved simultaneously with the heat transfer through the cylinder and surrounding system. This model shows this coupling between eddy ... Читать дальше

Frequency Domain Modeling of a Capacitor

A capacitor with an applied sinusoidally time-varying voltage difference is modeled. A wide frequency range is considered and the impedance of the device is computed. Solver accuracy is addressed. The relationship between the frequency domain impedance and the steady-state capacitance ... Читать дальше

Rotating Machinery 3D Tutorial

This is a tutorial how to set up electric machinery in 3D using a combination of the magnetic fields and magnetic fields no currents interfaces. Читать дальше