Lumped Loudspeaker Driver
Application ID: 12295
This is a model of a moving-coil loudspeaker where a lumped parameter analogy represents the behavior of the electrical and mechanical speaker components. The Thiele-Small parameters (small-signal parameters) serve as input to the lumped model, which is represented by an Electric Circuit physics. The lumped model is coupled to a 2D axisymmetric Pressure Acoustics model describing the surrounding air domain (above and below the speaker cone). The output from the model includes, among many things, the speaker sensitivity, the impedance, and the radiated acoustic power. The results are compared with an analytical solution based on the flat piston approximation.
The model requires the Acoustics Module and the AC/DC Module.
This model example illustrates applications of this type that would nominally be built using the following products:
however, additional products may be required to completely define and model it. Furthermore, this example may also be defined and modeled using components from the following product combinations:
- COMSOL Multiphysics® и
- Модуль «Акустика» и
- либо Модуль «AC/DC», Модуль «Электрохимические аккумуляторы», Модуль «MEMS», Модуль «Плазма», Модуль «Радиочастоты», или Модуль «Полупроводники»
The combination of COMSOL® products required to model your application depends on several factors and may include boundary conditions, material properties, physics interfaces, and part libraries. Particular functionality may be common to several products. To determine the right combination of products for your modeling needs, review the Спецификация and make use of a free evaluation license. The COMSOL Sales and Support teams are available for answering any questions you may have regarding this.