Headphone on an Artificial Ear
Application ID: 74271
Headphones are closely coupled to the ear, and so it is not possible to measure their sensitivity in a classical acoustic free-field setup used for loudspeakers. The measurement requires the use of artificial heads and ears to accurately represent the usage conditions. This model shows the coupling of a circumaural headphone to a generic artificial ear. The model uses the Poroelastic Waves physics interface to model the foam. The built-in Interior Perforated Plate model is used to represent perforates and meshes in the headphone casing. The artificial ear is coupled to a simplified ear canal and the impedance of the ear drum is specifically considered. An equivalent electrical circuit is used to model the driver in the headphone.
This model example illustrates applications of this type that would nominally be built using the following products:
however, additional products may be required to completely define and model it. Furthermore, this example may also be defined and modeled using components from the following product combinations:
- COMSOL Multiphysics® и
- Модуль Акустика и
- либо Модуль AC/DC, Модуль Аккумуляторы и топливные элементы, Модуль MEMS, Модуль Плазма, Модуль Радиочастоты, или Модуль Полупроводники
The combination of COMSOL® products required to model your application depends on several factors and may include boundary conditions, material properties, physics interfaces, and part libraries. Particular functionality may be common to several products. To determine the right combination of products for your modeling needs, review the Спецификация and make use of a free evaluation license. The COMSOL Sales and Support teams are available for answering any questions you may have regarding this.