Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

New COMSOL 4.0a update available

Posted Jul 23, 2010, 7:58 a.m. EDT Version 4.0a 1 Reply

Certified Consultant
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

There is now a patch update avaliable for COMSOL 4.0a:
www.comsol.com/support/updates/

I recommend everybody to install it. Thanks everybody who helped us identifying and fixing bugs!

Niklas
1 Reply Last Post Jul 23, 2010, 11:22 a.m. EDT
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Jul 23, 2010, 11:22 a.m. EDT
Thanks Niklas for a rapid response

Well I just tested some ACDC force calculations, I see no difference, but as they were already good and as expected, so I assume those corrections did not concern me :)

And the use of "Time discrete solver" seems now to work better, I'll have a closer look :)

--
Thanks again
Ivar
Thanks Niklas for a rapid response Well I just tested some ACDC force calculations, I see no difference, but as they were already good and as expected, so I assume those corrections did not concern me :) And the use of "Time discrete solver" seems now to work better, I'll have a closer look :) -- Thanks again Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content