Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Extrusion as a domain

Please login with a confirmed email address before reporting spam

Hi,

Imagine I have a substrate in which a geometrical shape has been machined into it (extruded in CAD). I want to model the fluid flow within the shape.

How can I access the shape as a "domain" within COMSOL? Consider the example in the screenshot ( I have removed a top cover for clarity). I want to assign the cut-out as my laminar flow domain and the rest of the substrate as another domain of a different material and physics. At the moment COMSOL associates everything as a single domain, so I have to model all parts as a fluid.

I have been successful in the past where I have had a shape "floating" within another shape i.e. the shape not cut-out but a shape within the larger block, then COMSOL has seen these as two separate domains.

The reason why I have not done this here is because the block has been provided to me with a cut-out and I do not want to change/redraw it.

Any Thoughts?

Many Thanks.
Tom


1 Reply Last Post Oct 6, 2012, 4:48 p.m. EDT
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Oct 6, 2012, 4:48 p.m. EDT
Hi

load in your hollow geoemtry, as is, then try the cover the top area with the COMSOL Geometry "Cap Faces" and selet the boundary edges

--
Good luck
Ivar
Hi load in your hollow geoemtry, as is, then try the cover the top area with the COMSOL Geometry "Cap Faces" and selet the boundary edges -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.