Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
How to model piercing in COMSOL
Posted Jun 20, 2019, 7:34 p.m. EDT Structural & Acoustics, MEMS & Piezoelectric Devices, Structural Mechanics Version 4.3 0 Replies
Please login with a confirmed email address before reporting spam
Hi guys!
I'm currently working on simulating Neural Probe insertion into the brain, and I'm currently having some issues having the probe be fully inserted into the brain. When running the simulation, the probe only pierces the surface and doesn't go further past that. Are there any suggestions for how to solve this?
If it's helpful, I established the contact pairs as the tip of the probe being the Source and the top of the brain being the Destination. Let me know if there's anymore information I should provide!
Thank you!
Hello Alex Castaneda
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.