Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Updated Whalefin Model

Posted Jan 17, 2011, 3:50 p.m. EST Installation & License Management Version 4.1 4 Replies

Alex Lovallo
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi I thought I would share this updated model that the support people sent me. It has been very helpful for me in designing a simple 2d drag model.

The ones on the website have not bee updated for 4.1 but this one has.

2d laminar flow

Attachments:

4 Replies Last Post Jan 23, 2011, 4:58 p.m. EST
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Jan 18, 2011, 5:51 a.m. EST
Hi

Thanks, it's always useful. by the way, have you noticed that in V4.1 you can upload the new library models with a specific command ? (See Options - Model Library update)

--
Good luck
Ivar
Hi Thanks, it's always useful. by the way, have you noticed that in V4.1 you can upload the new library models with a specific command ? (See Options - Model Library update) -- Good luck Ivar
E. J. Wucherer
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Jan 23, 2011, 10:53 a.m. EST
I tried the "Options - Model Library Update" several times and found " error contacting the update server". Perhaps this is my local firewall preventing the automatic communication.

Are model library updates available from ftp or some other non-automated route? EJ
I tried the "Options - Model Library Update" several times and found " error contacting the update server". Perhaps this is my local firewall preventing the automatic communication. Are model library updates available from ftp or some other non-automated route? EJ
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Jan 23, 2011, 4:26 p.m. EST
Hi

for me it has worked fine several times

--
Good luck
Ivar
Hi for me it has worked fine several times -- Good luck Ivar
Alex Lovallo
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Jan 23, 2011, 4:58 p.m. EST
I also just used it successfully.
I also just used it successfully.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content